Skip to main content

How to Properly Apply TapDots to Chairs for Long-Lasting Hold

This article explains how to properly apply TapDots to chairs to ensure strong, long-lasting adhesion, especially on fabric surfaces.

Updated over 2 weeks ago

TapDots are a powerful tool for connecting people with your church through a simple tap, but to make the most of them, proper application is key. When installing TapDots on chairs, especially fabric or cushioned surfaces, following a few simple steps will help ensure they stay secure and effective.

TapDots shipped during a warm season? Read this.

Rest period: Heat exposure during shipping can temporarily weaken adhesive performance. Adhesives are pressure-sensitive, and when they are exposed to high temperatures, they can feel gummy and lose tackiness until they stabilize. Please keep the TapDots in a cool, climate-controlled room (65–75°F) for at least 24 hours before applying. This lets the adhesive re-harden and regain its tack.
​

Step-by-Step: Applying TapDots to Chairs

  1. Clean the Surface (If Possible):
    Before you apply, please make sure the chair surface is free from dust, lint, or moisture. A quick wipe with a dry cloth can go a long way, especially on smooth or vinyl chairs.

  2. Peel Carefully:
    Remove the TapDot from its backing, being careful not to touch the adhesive with your fingers too much.

  3. Position with Intention:
    Choose a flat and easily accessible area on the chair, commonly the top backrest or a visible side panel. Once it touches the surface, repositioning will be difficult.

  4. Apply Firm Pressure:
    This is the most crucial step. Press down firmly across the entire TapDot, especially the edges. Hold it for at least 15-30 seconds to activate the adhesive and help it bond to the surface.

  5. Let It Cure:
    For best results, avoid heavy use or excessive touching of the TapDot for a few hours. The adhesive will continue to strengthen over time.

Tips for Fabric Surfaces

If you’re applying to fabric (such as upholstered chairs or pew seatbacks), use our fabric-specific adhesive TapDots. These have been tested on textured and flexible surfaces, but even with a specialty adhesive, applying firm pressure is crucial.

  • Press deeply into the fabric texture.

  • Hold with your hand flat on the TapDot and apply firm pressure for at least 15-30 seconds.

Final Thoughts

A TapDot that’s properly applied can last a long time and serve hundreds of guests. Taking the extra 30 seconds to press and hold each one ensures the strongest bond and best performance.

TapDots are a powerful tool for connecting people with your church feel free to through a simple tap, We’re here to help you make the best connection possible.

Did this answer your question?